Product Specs

WHAT’S INCLUDED Complete Stroller, Custom Rain Cover and Cup Holder


Max Weight: 55 lbs.

Dimensions:

Folded with seat: 20” x 23.5” x 28.5”

Folded without seat: 14” x 23.5” x 28.5”

Unfolded: 37.5” x 23.5” x 41.25”

Weight:

Frame only: 15 lbs.

With seat: 24.5 lbs.

Materials: 

Aluminum alloy frame

No-puncture tires using custom EVA-rubber blend

Certified UPF 50+ Canopy

Stain-resistant Comfort Layer

Durable vegan leather handlebar

PVC-free Rain Cover

Basket Dimensions: 22"x17"x6.5"

Max Basket Weight: 22lbs.

Safety and testing: JPMA Certified. All of our products meet or exceed all relevant US safety regulations as confirmed by third-party testing.

Frequently Asked
Questions

Did you know our customer service team is made up of fellow parents? They are standing by to answer any and all of your questions!

Contact Us

Unfolding the Stroller

WATCH THE HOW TO VIDEO

Tip: It is easiest to unfold the stroller when you are standing beside the stroller, not behind the stroller.
1. Release the fold latch.
2. Spread the handlebar and front leg apart. Handlebar is locked when you hear a click.
3. Bring the seat to its upright position by pulling the top of the seat upward. Seat locks with a click.
4. Rotate the bumper bar up. Bumper bar locks with a click.

Folding the Stroller

WATCH THE HOW TO VIDEO

Tip: Lock one or both front wheels for the stroller to self stand when folded.
1. Press the fold button on the seatback.
2. While pressing the fold button, pull up on the seat recline tab. You can release the fold button once the seat recline tab is up.
3. Fold the seat forward while holding up the seat recline tab.
4. Press the handlebar down.
5. Make sure the fold latch is engaged.

Locking and Unlocking the Wheels

WATCH THE HOW TO VIDEO

Wheels can only lock if they are pointing straight forward.

Twist the wheel lock bar to lock and unlock the wheels:
-Outward to lock.
-Inward to unlock.

Using the Brake

WATCH THE HOW TO VIDEO

Tip: Stepping on one pedal releases the other.
-Step on the brake release pedal to go.
-Step on the brake pedal to stop.

Attaching the Wheels

WATCH THE HOW TO VIDEO

1. Front Wheels: Guide the metal pin on the stroller base into the black tube on the wheel. Wheel locks with a click
2. Rear Wheels: Guide the metal pin on the wheel into the hole in the rear wheel hub on the stroller base. Wheel locks with a click.

Removing the Wheels

WATCH THE HOW TO VIDEO

1. Front Wheels: Press the black button on the front of the wheel base. Pull wheel downward.
2. Rear Wheels: Press the black button on the underside of the rear wheel hub. Hold the button down and pull the wheel out.

Removing and Attaching the Seat

WATCH THE HOW TO VIDEO

Removing the Seat:
1. Press the grey lock buttons on the seat attachment points. You can press each button separately and do not need to hold both down at the same time.
2. Lift the seat off the stroller base.

Attaching the Seat:
Line up the seat attachment points on the seat with the seat attachment points on the stroller base.

Reclining the Seat

WATCH THE HOW TO VIDEO

Warning: Children under 6 months old are required to lay flat and use the Colugo Complete Infant System or a Car Seat. Do not press the fold button or the stroller will fold.

1. Pull up on the recline tab.
2. Guide the seat back to one of 3 seat positions: upright, reclined or flat.

Adjusting the Footrest

WATCH THE HOW TO VIDEO

Warning: Children under 6 months old are required to lay flat and use the Colugo Complete Infant System or a Car Seat. Do not press the fold button or the stroller will fold.

1. Press the button on the footrest and lift to one of two footrest heights.
2. We recommend the following footrest positions:
-Flat for toddlers.
-Down for older kids.

Adjusting for an Infant

WATCH THE HOW TO VIDEO

1. Fully recline the seat with the footrest in the flat position.
2. Access the seat containment from under the footrest.
3. Thread the bumper bar through the sleeve on the containment.
4. Click the bumper bar into place and snap the footrest containment under the seat and into the snaps on the stroller frame.
5. Snap the containment straps under the footrest.
6. Add the infant insert on top of the comfort layer, threading the harness straps through the holes. Adjust the harness to fit your child.

Adjusting the Harness

WATCH THE HOW TO VIDEO

Tip: Adjust the shoulder strap height first and then adjust the waist and shoulder strap length.

1. Unzip the seatback cover from the base up to the recline tab.
2. Peel back the seatback cover to reveal the seatback.
3. Push the plastic stopper on the end of the harness strap through the hole on the seatback to the front of the seat.
4. Push the plastic stopper back through the seatback at the best height for your child.
5. Tug the harness strap from the front to make sure it is secure.
6. Zip the seatback cover closed.

Using the Buckle

WATCH THE HOW TO VIDEO

Tip: The sides of the buckle base are magnetically connected and a slight twisting motion separates them most easily.

Unbuckling the Harness:
1. Squeeze the side buttons on the buckle top at the same time.
2. Lift the buckle top off the buckle base.
3. Separate the two parts of the buckle base.

Buckling the Harness:
1. Layer the three pieces of the buckle starting with the left side of the buckle base.
2. Place the right side of the buckle base on top of the left side. They will magnetically connect.
3. Place the buckle top on top of the buckle base. Buckle locks with a click

Removing the Canopy

WATCH THE HOW TO VIDEO

1. Using a pen, push into the hole on the inside arm of the canopy.
2. Pull the canopy arms out of their holders.
3. Unzip the canopy from the seat - access the zipper on the rear left of the canopy.

Using the Rain Cover

WATCH THE HOW TO VIDEO

Tip: The rain cover bag has an umbrella pocket

1. Attach the rain cover to the seatback cover by looping all four toggles on the rain cover bag through the accessory loops on the seatback cover.
Note: Attach the rain cover bag so that the zipper is at the top.
2. Pull the rain cover out from the bag and drape it over the stroller.
3. Connect the velcro straps to the stroller base.
4. For infants in a flat seat, pull the drawstring at the base of the rain cover to make the rain cover snug.

Removing the Bumper Bar

WATCH THE HOW TO VIDEO

Press the button on one side of the bumper bar to open it. Press the buttons on and both sides to remove it.

Cleaning

1. Frame: Wipe with a damp cloth and let dry.
2. Basket: Wipe with a damp cloth. Basket is fully removable.
3. Wheels: Clean with a brush and a mild detergent.
4. Footrest: Unzip to shake out crumbs or wipe clean.
5. Comfort Layer: Machine washable, air dry. To remove, undo the shoulder and waist harness straps and pull the comfort layer off the stroller base.
6. Canopy: Spot clean, see Operating Instructions for how to remove Canopy.
7. All base layer fabrics are removable.

Maintenance and Repair

1. This product requires user inspection and maintenance regularly. Check all connecting hardware (rivets, screws, etc.) for tightness and security. Inspect all brakes, tires, seat harnesses and locks for correct operation. Seek prompt repairs or replacements as needed and never continue using the product if it is structurally not safe.
2. Only Colugo replacement parts should be used. It may be unsafe to use parts supplied by another manufacturer.
Contact Customer Service by phone at 646.257.2810 with any repair questions.

Complete Stroller Full Instructions